Steering Wheel Gear Motor 12V 7nm 16nm Autosteer Motor for Tractor Automated Autopilot Steering System

• Application: Industrial Application
• Product Name: DC Motor
• Keywords: High Torque Gear Motor
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LK170DD0105-08
• Typical Applications: Autonomous Agricultural Vehicle
• Motor Type: DC Brushless Three Phase
• Feature: Long Life Time
• Structure: Gear Drive
• MOQ: 1 PC
• Rated Voltage: 12V
• Control Signal: RS232, Can 2.0
• Trademark: lanjiu
• Origin: China
• Production Capacity: 1000
• Package Size: 30.00cm * 15.00cm * 15.00cm
• Package Gross Weight: 20.000kg

Product Description

 

 

00:15

 

00:15Steering wheel gear motor 12v 7nm 16nm autosteer motor for tractor automated autopilot steering system

 

Proct Application

Motor: 12v 50w
Continuous current 8.5, maximum peak current 15A (1s)
DC working power +9~18vdc
Working mode: speed mode, torque mode
eed mode, position mode;
1.3. Conditions of use
1.3.1 Power supply:
Rated working power: 12vdc
Limit power supply range: 9--18vdc
t can provide instantaneous current overload capability of 2 times continuous current
1.3.2 Feedback component:
Incremental encoder (conventional product), absolute encoder(if you need absolute encoder, please advise in advance).
1.3.3 Use environment:
Operating temperature: -25~55°C (based on environment temperature);
Storage temperature: -35~65°C (based on environment temperature);
Humidity: 5%--90%RH, condensation (25°C)
Protection level: IP65,
Insulation performance: input to the chassis DC600V, leakage current 0.07mA.The insulation resistance is 20 MΩ or more.
Three-proof requirements: meet the requirements of three defenses (dust, moisture, salt spray).
Vibration requirements: Frequency 5Hz ~ 25Hz, amplitude 3mm, 0.09g.
Frequency 25Hz~200Hz, amplitude 1.47mm, 116g.
Horizontal, vertical, and longitudinal directions are 30 min in each direction.
Cooling method: natural cooling

Details Images

Parameter	Label	Parameter value	unit
Voltage	U	9-18	VDC
Maximum continuous current	Ic	25	A
Maximum peak current	Imax	50 (1s overcurrent protection)	A
Pwm switching frequency	fpwm	10	kHz
Output encoder power supply	+5Vout	5	VDC
	Icc	100	mA
Digital input	EN,DIR	Cutoff (high level): less than 1mA Brakeover (low level): 3~7mA	mA
Analog input impedance	Single-ended input	20	KΩ
Analog signal voltage	Single-ended input	0~5V	V
Under voltage protection	Vu	9	V
Over voltage protection	Vo	18	V
Operating temperature	Industrial grade (standard product)	-25 ~ +55	ºC
Storage temperature	Industrial grade (standard product)	-35 ~ +65	ºC

Manufacturing Technique

 

7- core definition	1	IN+	Power input +
	2	IN-	Power input -
	3	TX	RS232-TX
	4	RX	RS232-RX
7- core definition	5	GND	0V
	6	CAN-H	CAN-H
	7	CAN-L	CAN-L

12- core definition	1	IN+	Power input +
	2	IN+	Power input +
	3	IN-	Power input -
	4	IN-	Power input -
	5	D/A	Analog signal input(0-5V)
	6	TX	RS232-TX
	7	RX	RS232-RX
	8	GND	0V
	9	CAN-H	CAN-H
	10	CAN-L	CAN-L

Steering motor torque direct drive motor for agriculture automatic guiding system