| Customization: | Available |
|---|---|
| Task: | Adjust |
| Structure: | Closed-Loop |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
220v high voltage brushless dc motor controller 1000w 1500w 3 phase motor speed controller
LKBL-2210F
It can be connected with an external speed display board LK-BL01, showing
the speed, set drive parameters;
It has double speed closed current design with low speed torque and smooth operation;
It has high speed output with the maximum speed of 10000rpm / min;
The speed control mode is an external PWM speed and
external potentiometer speed;
It has have EN, DIR,X1 signal control side;
It can output FG signals (optoelectronic isolation, gate output);
It can output ALM signals for the user to detect (optoelectronic isolation, gate output);
It has over-current, overvoltage, under voltage, fan control and Hall Sensor
phase error, motor stalling and other protection functions;
LK-BL2205F is the latest high-tech product of our company, for the field of medium power motor drive. It uses a
large-scale integrated circuit to replace the original hardware, so it has higher performance of anti-jamming and fast response ability. It is suitable for all the low voltage three-phase brushless DC motors with peak current below 5A and low voltage AC80V-250V(boards show AC80V-220V) ,whether the motor driver with Hall or not. It is widely used in knitting equipment, medical equipment, food packaging machinery, electric tools and a series of electrical automation control area .
Function as following: (default setting mode: Square wave, Hall, Open loop)
1.Run model: square wave, with hall sensor, open loop speed
2.Run model: square wave, with hall sensor, closed loop speed
3.Run model: square wave, without hall sensor, open loop speed
4.Run model: square wave, without hall sensor, closed loop speed
5.Run model: constant-torque device, open loop speed( Don't run for long time with overloading)
6.Run model: constant-torque device, closed loop speed(Don't run for long time with overloading)
On the basis of our upper computer software and hand debugger, all the above functions can be set by yourself.
Environmental Temperature:25ºC
(2) Environmental Parameter
Note: Due to dramatic changes in the temperature of the storage environment, it is easy to form condensation or frost. In this case, the drive should be placed for 12 hours or more. Until the drive temperature and ambient temperature is consistent, it can be on power.
| Power supply | AC80V~220V direct current (Capacity according to motor power selection) |
| The maximum input current | Not greater than5A (according to motor and rated load) |
| The maximum power | The maximum is 2000W(over power motor is strictly prohibited) |
| Adaptable motor | Adaptable output power 1500W motor |
| Insulation resistance | General temperature 500MΩ |
| Insulation strength | General temperature and pressure 0.5KV, 1minitute |
Environmental Parameter
|
Cooling method |
Natural air cooling & forced air cooling |
|
|
Environment |
Condition |
Avoid dust, oil mist and corrosive gases |
|
|
Temperature |
0ºC~+50ºC |
|
|
Humidity |
80%RH,no condensation, no frost |
|
|
Vibration |
0.5G(4.9m/s2 )10Hz-60Hz (non-continuous operation) |
|
Reserved temperature |
-20ºC~+65ºC |
|
|
Size |
198mmX103mmX86mm |
|
|
Weight |
About 1Kg |
|
Drive workshop and equipment
){kind=link}