Steering Steering Motor12V 50W 6n. M 85rpm Torque Direct Drive BLDC Motor for Agriculture Automatic Guiding System

• Customization: Available
• Operating Speed: Low Speed
• Function: Control, Driving
• Model NO.: LK170DD0105-08
• Structure and Working Principle: Brushless
• Product Name: DC Motor
• Keywords: High Torque Gear Motor
• Typical Applications: Precision Agriculture
• Motor Type: DC Brushless Three Phase
• Control Signal: RS232, Can 2.0
• MOQ: 1 PC
• Structure: Permanent Magnet Stator
• Rated Voltage: 12V
• Specification: 170
• Trademark: lulanjiu
• Origin: China
• Production Capacity: 50000
• Package Size: 30.00cm * 15.00cm * 15.00cm
• Package Gross Weight: 10.000kg

Product Description

 

 

Product Description

 

Product Description

 

Product Application

Motor: 12v 50w
Continuous current 8.5, maximum peak current 15A (1s)
DC working power +9~18vdc
Working mode: speed mode, torque mode
eed mode, position mode;
1.3. Conditions of use
1.3.1 Power supply:
Rated working power: 12vdc
Limit power supply range: 9--18vdc
t can provide instantaneous current overload capability of 2 times continuous current
1.3.2 Feedback component:
Incremental encoder (conventional product), absolute encoder(if you need absolute encoder, please advise in advance).
1.3.3 Use environment:
Operating temperature: -25~55°C (based on environment temperature);
Storage temperature: -35~65°C (based on environment temperature);
Humidity: 5%--90%RH, condensation (25°C)
Protection level: IP65,
Insulation performance: input to the chassis DC600V, leakage current 0.07mA.The insulation resistance is 20 MΩ or more.
Three-proof requirements: meet the requirements of three defenses (dust, moisture, salt spray).
Vibration requirements: Frequency 5Hz ~ 25Hz, amplitude 3mm, 0.09g.
Frequency 25Hz~200Hz, amplitude 1.47mm, 116g.
Horizontal, vertical, and longitudinal directions are 30 min in each direction.
Cooling method: natural cooling

Product performance

 

Parameter	Label	Parameter value	unit
Voltage	U	9-18	VDC
Maximum continuous current	Ic	25	A
Maximum peak current	Imax	50 (1s overcurrent protection)	A
Pwm switching frequency	fpwm	10	kHz
Output encoder power supply	+5Vout	5	VDC
	Icc	100	mA
Digital input	EN,DIR	Cutoff (high level): less than 1mA Brakeover (low level): 3~7mA	mA
Analog input impedance	Single-ended input	20	KΩ
Analog signal voltage	Single-ended input	0~5V	V
Under voltage protection	Vu	9	V
Over voltage protection	Vo	18	V
Operating temperature	Industrial grade (standard product)	-25 ~ +55	ºC
		-40 ~ +65
Storage temperature	Industrial grade (standard product)	-35 ~ +65	ºC
		-55 ~ +85