High torque 4.7 inch 48V 6.4N.m brushless electric motor with encoder bldc agv robot servo motor and driver
Product Description
What is a Brushless DC motor (BLDC)?
Brushless DC motor (known as BLDC) is a permanent magnet synchronous electric motor which is driven by direct current (DC) electricity and it accomplishes electronically controlled commutation system (commutation is the process of producing rotational torque in the motor by changing phase currents through it at appropriate times) instead of a mechanically commutation system. BLDC motors are also referred as trapezoidal permanent magnet motors.
It has no mechanical commutator and associated problems High efficiency due to the use of permanent magnet rotor High speed of operation even in loaded and unloaded conditions due to the absence of brushes that limits the speed Smaller motor geometry and lighter in weight than both brushed type DC and induction AC motors Long life as no inspection and maintenance is required for commutator system Higher dynamic response due to low inertia and carrying windings in the stator Less electromagnetic interference Quite operation (or low noise) due to absence of brushess.
Product Parameters
LKBS48501 is an intelligent brushless DC controller. It adopts 32-bit high-performance MCU,Advanced motion control algorithm is suitable to the outside of the quadrature encoder input to complete the open loop and closed loop speed, under the closed loop torque of motor sport.Controller with multiple analog input port, the pulse input port and digital I/O port, can through the special software to redefine its functions.Universal RS232 serial port communication, CAN bus, CAN be widely used in automation
Product Features:
-Wide-range voltage input, 10-55V.
-Intelligent PID control loop.
-Working mode: Speed open-loop, close-loop control, torque close-loop control, position close-loop control.
-External potentiometer, 0-5V analog quantity or pulse command control mode, RC (pulse width signal outputted by the receiver of aeromodelling remote control) control mode.
-Safety forward & reverse control, four-quadrant operation, support regeneration.
-Enable control function.
-Maximum current control.
-4-way input port; the function can be defined as analog input, pulse input or digital input functions.
-2-way digital (MOS tube open-drain) output, Generally as 24V 1A output (maximum load capacity of 40V 1A), can be used to loosen the brake or
other attachments.
-Abnormalities like overcurrent, overheating, overvoltage and short circuit will start the protection function.
-LED status indicator.
-CAN bus communication, see the detailed communication protocol when using it
Audited Supplier 
){kind=link}