Brushless Servo Driver Dual Channel Low Voltage High Power 1kw 1.5kw 48V24V

• Customization: Available
• Task: Adjust
• Structure: Closed-Loop
• Model NO.: LKBS48502
• Signal: Continuous
• Function: Automatic Control, Protection, Monitoring, Measurement
• Condition: New
• Customized: Customized
• Adapter Motor: Brushless DC Motor
• Transport Package: Carton
• Trademark: Lulanjiu
• Origin: China
• HS Code: 8543709990
• Production Capacity: 1000

Product Description

48v 500w 600w 800w 1000w Rs232 CAN open control close loop intelligent dual channel bldc motor controller
The control signal has as many as 8 modes (wireless remote control, rocker, potentiometer, analog quantity, frequency, pulse width, RS232, CAN bus)

Overview

LK48502 is an intelligent brushless DC dual channel motor controller. The brushless dual-channel motor driver can control two brushless DC motors at the same time. It adopts 32-bit high-performance MCU and advanced movement processing algorithm to realize internal electric differential function. The controller uses the Hall signal inside the motor as the rotor position feedback and works with the external incremental encoder (1000-2500 line) signal to control the movement of motor, realizing speed open-loop, close-loop modes, position mode and torque mode. It has two-way independent driver chip, two-way encoder processing chip, two-way Hall signal processing chip. Meanwhile, it has multiple failure alarm functions. It has two working modes: independent mode and mixed mode.
Independent mode: It can realize fully independent control of two-way motor, and the control signal part is controlled by two-way input signals. Two-way brushless DC motor can control the speed and direction of motor, separately.
Mixed mode: It can realize the synchronous control (forward, backward, left and right rotation) of two brushless motors.
 

II. Specification and Model
	MAX	MAX	DC
MODEL	OUTPUT AMP AC : (A)	OUTPUT VOLT DC:(V)	RANGE DC:(V)
LK48502	50	55	10-55

1. Product Features:

Wide-range voltage input, 10-55V. Intelligent PID control loop.
Working mode: Speed open-loop, close-loop control, torque close-loop control, position close-loop control.
External potentiometer, 0-5V analog quantity or pulse command control mode, RC (pulse width signal outputted by the receiver of aeromodelling remote control) control

mode.
Safety forward & reverse control, four-quadrant operation, support regeneration. Enable control function.
Maximum current control.
4-way input port; the function can be defined as analog input, pulse input or digital input functions.
6-way digital (MOS tube open-drain) output, which can serve as the failure alarm status output of controller and can control the external relay to realize actions such as automatic disconnection of power.
Abnormalities like overcurrent, overheating, overvoltage and short circuit will start the protection function.
LED status indicator.
CAN bus communication, see the detailed communication protocol when using it. RS232 communication, see the detailed communication protocol when using it.

1. Performance Index:

1. Power voltage: 10-55VDC.
2. At the ambient temperature 25ºC, continuous working current 30A, transient current up to 50A 30S.
3. Minimum speed: 10 RPM in the speed close-loop mode; 1 RPM in the position mode.
4. Out+5VDC power (It can power up the encoder): 5V DC 20mA
5. Analog input range: 0-- 5VDC
6. Impulse input range: 500Hz-5000Hz (corresponding maximum speed) [Note] The minimum impulse frequency may change along with the setting of maximum speed.
7. Input range of duty ratio 0%-- 100% (input frequency range f ≤1KHz, recommend

to use the frequency of 250Hz).

1. Temperature protection status: When the temperature is 70ºC, the controller will reduce output by overheating protection and will stop output when the temperature is

80ºC.

1. Working temperature: -20ºC-- +60ºC.
2. Ambient humidity: Relative humidity≤80RH.
3. Boundary dimension: L * W * H = 190mm * 130mm * 40mm   Weight: 800g
4. 

Note: The bottom of controller shell has 4*Φ5mm holes for installation and fixing, and installation can be conducted in the horizontal direction.
Keep the controller away from dust and high temperature environment, and avoid unexpected contact. Keep sufficient space around the controller for ventilation and adjustment.
When fixing the controller, keep it from other heat sources. Ensure the controller

 

• Drive workshop and equipment
  
  DC Motor Drive Packaging and Shipping