DC Brushless Driver Supports Encoder and Hall Sensor Motor 48V 300W 24V200W 100W

• Customization: Available
• Task: Adjust
• Structure: Closed-Loop
• Model NO.: LKBS48151
• Signal: Continuous
• Function: Automatic Control, Protection, Monitoring, Measurement
• Condition: New
• Customized: Customized
• Adapter Motor: Brushless DC Motor
• Rated Current: 15
• Continuous Current: 8
• Transport Package: Carton
• Trademark: Lulanjiu
• Origin: China
• HS Code: 8543709990
• Production Capacity: 1000
• Package Size: 30.00cm * 15.00cm * 15.00cm
• Package Gross Weight: 0.900kg

Product Description

Overview:
LKBS48151 is a kind of intelligent brushless dc motor controller.The use of high-performance 32-bit MCU controller, adopts
the advanced control algorithms, coordinate external quadrature encoder input to complete the open loop and closed  loop speed, under the closed loop torque of motor sport.Controller with multiple analog input port, the pulse input port and digital I/O port, can through the special software to redefine its functions.Universal RS232 serial port communication, CAN Open, CAN be widely used in automation.

Specification and model:

Model	Maximum	Maximum	Direct voltage
	Output current	Output voltage	Working range
	DC : (A)	DC: (V)	DC: (V)
LKBS48151	15	48	10-50(95%)

Product features:

1. Wide voltage input.
2. Intelligent PID control loop.
3. Four works type: open loop control, closed loop speed control, open loop and closed loop torque control. 4.External potentiometer, external 0 to 5 VDC analog, pulse command control mode, the RC control mode. 5.Safety of forward & reverse control, four quadrant operation, support regeneration.

6.Enable control function. 7.Maximum current limit.
8.4 input port, the function may be defined as analog input, pulse input or digital input function.
9.2 MOS open drain circuit output , generally as 24 v 1 a output (maximum load capacity of 40 v 1 a), can be used to

control relay coil or other attachments.

1. Over-current, overheating, overvoltage, undervoltage, short circuit anomalies such as starting protection function.
2. LED status indicator, fault alarm output.
3. CAN bus communication, and customers to use you then details of the communication protocol. 13.RS232 communication, and customers to use you then a serial port protocol in deta.

Performance indicators:

1. Supply voltage: 10 to 50 VDC.
2. Continuous working current 13 A, peak current 30 A.

3,.Out + 5 VDC power supply (power supply to encoder): 5VDC.20 Ma. 4.Analog input range: 0-5 VDC.
5.Pulse input range: 500 hz - 5000 hz (corresponding to maximum speed)
Note : The minimum pulse frequency with different maximum speed Settings will have corresponding change. 6.Duty cycle input range 20% -- 80% ( input frequency range f≤1 KHZ , recommended to use 250 Hz frequency)

1. RC signal (a PWM signal: RC remote control receiver output signal)
2. Digital output interface: 2 road, open drain, maximum load capacity of 40 V 1 A.
3. Temperature protection status: 70 ºC overheating protection to reduce the output, 85 ºC stop output. 10.Working environment temperature 25 ºC - + 60 ºC.

11.Environment humidity: relative humidity ≤ 80 . 12.Size: L * W * H = 90 mm * 75 mm * 35 mm 13.Weight: 185 g

 V. Boundary Dimension: