Can RS232 Mix Mode Intelligent Two Channel DC Servo Motor Controller 24V 48V Brushless Servo Motor Driver for Agv Robot

• Task: Adjust
• Structure: Closed-Loop
• Signal: Continuous
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LKBS48501
• Function: Automatic Control, Protection, Monitoring, Measurement
• Condition: New
• Customized: Customized
• Adapter Motor: Brushless DC Motor
• Rated Current: 50
• Transport Package: Carton
• Trademark: Lulanjiu
• Origin: China
• HS Code: 8543709990
• Production Capacity: 1000
• Package Size: 30.00cm * 15.00cm * 15.00cm
• Package Gross Weight: 1.500kg

Product Description

LKBS48501 is an intelligent brushless DC controller. It adopts 32-bit high-performance MCU,Advanced motion control algorithm is suitable to the outside of the quadrature encoder  input to complete the open loop and closed loop speed, under the closed loop torque of motor sport.Controller with multiple analog input port, the pulse input port and digital I/O port, can through the special software to redefine its functions.Universal RS232 serial port communication,
CAN bus, CAN be widely used in automation.

1. Product Features:

1. Wide-range voltage input, 10-55V.

 

1. Intelligent PID control loop.

 

1. Working mode: Speed open-loop, close-loop control, torque close-loop control, position close-loop control.
2. External potentiometer, 0-5V analog quantity or pulse command control mode, RC (pulse width signal outputted by the receiver of aeromodelling remote control) control mode.
3. Safety forward & reverse control, four-quadrant operation, support regeneration.

 

1. Enable control function.

 

1. Maximum current control.

 

1. 4-way input port; the function can be defined as analog input, pulse input or digital input functions.
2. 2-way digital (MOS tube open-drain) output, Generally as 24V 1A output

 

1. (maximum load capacity of 40V 1A), can be used to loosen the brake or

 

1. other attachments.

 

1. Abnormalities like overcurrent, overheating, overvoltage and short circuit will start the protection function.
2. LED status indicator.

 

1. CAN bus communication, see the detailed communication protocol when using it.

 

1. RS232 communication, see the detailed communication protocol when using it.

1. Performance Index:

1. Power voltage: 10-55VDC.
2. At the ambient temperature 25ºC, continuous working current 30A, transient current up to 50A .
3. Out+5VDC power (It can power up the encoder): 5V DC 20mA
4. Analog input range: 0-- 5VDC
5. Impulse input range: 500Hz-5000Hz (corresponding maximum speed)
6. [Note] The minimum impulse frequency may change along with the setting of maximum speed.
7. Input range of duty ratio 0%-- 100% (input frequency range f ≤1KHz, recommend to use the frequency of 250Hz).
8. the digital output interface: 2 road, open drain, maximum load capacity of 40 V 1 A
9. Temperature protection status: When the temperature is 70ºC, the controller will reduce output by overheating protection and will stop output when the temperature is 80ºC.
10. Working temperature: -30ºC-- +60ºC.
11. Ambient humidity: Relative humidity≤80RH.
12. Boundary dimension: L * W * H = 148mm * 117mm * 40mm
13. Weight: 800g
14. 

 

Model	Max output	Max	DC
	current	output volt	Range
	AC : (A)	DC:(V)	DC:(V)
LKBS48501	50	30	0-50

V. Boundary Dimension: