Lk-Bl4810f Low Price Brushless 24V DC Motor Controller 200W 300W BLDC Motor Controller Brushless DC Motor Driver

• Task: Adjust
• Structure: Closed-Loop
• Signal: Continuous
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Function: Automatic Control, Protection, Monitoring, Measurement
• Condition: New
• Customized: Customized
• Adapter Motor: Brushless DC Motor
• Transport Package: Carton
• Trademark: Lulanjiu
• Origin: China
• HS Code: 8543709990
• Production Capacity: 1000
• Package Size: 30.00cm * 15.00cm * 15.00cm
• Package Gross Weight: 1.500kg

Product Description

Low price brushless 24V dc motor controller 200w 300w bldc motor controller Brushless DC Driver

                                         LKBL-4810F
 

Product Description

Output with high torque and speed ,the maximum speed is 10000rpm / min(according to the motor rotational speed);  

With pulse velocity output, motor rotational speed can be observed anytime;

Speed control : analog quantity(0-5V) and PWM(10Hz-300Hz);

EN, DIR signal input;

Functions: Over-current, overvoltage, and so on;

Product Overviews

 

 It can be connected with an external speed display board ZM-BL01, showing

the speed, set drive parameters;

It has double speed closed current design with low speed torque and smooth operation;

It has high speed output with the maximum speed of 10000rpm / min;  

Speed control mode : analog quantity 0-5V,(according to the users' requirement we can set  PWM within 100Hz-100kHz)

It has have EN, DIR signal control side;

It can output tachometer pulse;

It has over-current, overvoltage, under voltage , motor stalling and other protection functions;

Advantages

 LK-BL4810F brushless DC motor driver is our company's latest high-tech product for the field of medium power motor drive. This product uses a large-scale integrated circuit to replace the original hardware. It has higher anti-jamming and fast response ability. It is suitable for all the three-phase brushless DC motors with low voltage DC18V-50V(boards show DC24V-48V) and peak current below 10A. Even if working with large current, it is still in low temperature. It is widely used in knitting equipment, medical equipment, food packaging machinery, power tools and a series of areas of electrical automation and control.

1.Run model: square wave, with hall sensor, open loop speed

2.Run model: square wave, with hall sensor, closed loop speed

3.Run model: square wave, without hall sensor, open loop speed

4.Run model: square wave, without hall sensor, closed loop speed

5.Run model: constant-torque device, open loop speed(Don't run for long time with overloading)

6.Run model: constant-torque device, closed loop speed(Don't run for long time with overloading)

 

On the basis of our upper computer software and hand debugger, all the above functions can be set by yourself

Power supply	DC18V~50V direct current (Capacity according to motor power selection)
The maximum input current	Not greater than10A  (according to motor and rated load)
The maximum power	The maximum is 480W (over power motor is strictly prohibited)
Adaptable motor	Adaptable output power ≤300W motor
Insulation resistance	General temperature500MΩ
Insulation strength	General temperature and pressure 0.5KV,1minitute

 

(2)Environmental Parameter

 

Cooling method		Natural air cooling (forced air cooling is recommended)
Environment	Condition	Avoid dust, oil mist and corrosive gases
	Temperature	0ºC~+50ºC
	Humidity	80%RH,no condensation, no frost
	Vibration	0.5G(4.9m/s^2)10Hz-60Hz (non-continuous operation)
Reserved temperature		-20ºC~+65ºC
Size		118mmX75.5mmX34mm
Weight		About 0.3Kg

 

Size